Iluminación de tiras LED flexibles

Yes. Sensio LED strip lights can be cut at the marked cut points, and the free-cut X range, such as Polar X, can be cut anywhere. See can you cut LED strip lights? for the cut points on every strip.

Yes. Our TrueFIT service cuts LED strip and profiles to your exact lengths, pre-solders the connections and kits each run with the right driver, ready to fit. It has a 48-hour turnaround and a 7 year guarantee, and is made for electricians, contractors and shopfitters.

Under kitchen cabinets and along plinths, a COB strip such as Polar X gives a continuous line of light with no visible LED dots. Fit it in an aluminium profile for a neat finish. Read the best LED strip lights for a kitchen, or see all kitchen LED strip lights.

COB stands for chip on board. The LEDs sit so close together that the strip gives one continuous line of light with no visible dots, so it often needs no cover. Polar X, Polar Pro and Razor are COB strips. See all COB LED strips.

Free-cut strip can be cut at any point, not just at marked cut points, so the light runs right to the end of the cabinet or plinth. The Sensio X range, including Polar X, Razor X and Primo X, is free cut. See all free-cut LED strips.

Yes. LED tape, LED strip and LED strip lights are different names for the same flexible lighting, sold on a reel and cut to length.

Yes. LED strip lights run at low voltage, so they need an LED driver, such as the Titan+ driver, to run from the mains. Add up the wattage of everything on the driver and choose a driver rated above it; if you are close to the limit, go up a size. Our guide what size LED driver do I need? and the Driver Calculator work it out.

Most Sensio LED strip lights run at 24V, which allows longer runs without the light fading at the far end. Use them with a 24V LED driver with the matching pin type.

The strip plugs into a 24V LED driver with its driver connection cable, so no soldering is needed. Join runs or turn corners with the matching clips, leads and corner connectors. Watch how to connect LED strip lights.

Not always. COB strips such as Polar X give a fully diffused line of light with no visible dots, so they do not need a cover. A profile protects the strip and gives a neater finish, and our Universal profiles such as Fino and Linia work with any Sensio flexible strip. See all lighting profiles.

Yes. Sigma 2 bends around 90 degree corners without corner cables, and Razor X bends around corner recesses. Other strips turn corners with matching corner connectors.

Yes. Add a Sensio receiver and the Universal Remote Control, or use a Titan™ Smart Kinetic driver with the Link Sensio app, Amazon Alexa or Google Assistant, and the wireless Kinetic Switch.

Yes. Several strips, including Viva 3, Primo 2, Sigma 2 and Dart, are also sold as kits, and Ion and Flux come as remote or smart kits. Choose the kit option on the product page, where the contents are listed.

Yes, choose an IP65 rated strip such as Polar X IP65, approved for bathroom zones 1 and 2. Check the bathroom zones and IP ratings first, and see all IP65 rated LED strips.

24V strips allow long runs. Polar X runs up to 25m without the light fading at the far end.

Yes. CCT strips move from warm to cool white, RGBCCT strips add colours, and dual temperature strips let you choose natural or warm white on site. See our colour temperature chart.

LED strip lasts far longer than traditional bulbs, and every Sensio LED strip comes with a 7 year guarantee. See our guarantee for the terms.

No, LED strip uses little power compared with traditional lighting. Each strip's wattage is shown in the specification on its product page.